Outils pour utilisateurs

Outils du site


PCB creation

PCB house

There are a number of PCB suppliers listed on this wiki page.

  • Add template(s) with design rules

Milling (Cylcone)

For simple PCBs (in particular: small, single-layered, large structure sizes/spacings, single drill size), PCB milling with our Cyclone PCB factory V2 PCB mill is probably one of the fastest ways to produce a PCB at PTL.

Design flow

  • Add template(s) with design rules
  • Add description of work flow
  • Add video tutorial/screencast

List of created PCBs

Date Title Material Mill (trace) Drill Mill (edge) Comments Picture(s)
26/03/2015 First PCB milled on the CycloneV2 Unknown, double-sided 30 deg V-cut 0.9 mm 1.5 mm First PCB!
02/04/2015 PIC16F1455 test board Single-sided (conrad.ch?) 30 deg V-cut 0.9 mm 1.5 mm fixed g-code generator to simplify output code, went much more smoothly
09/04/2015 PTL-ino PIC16F1455 programming shield Single-sided (conrad.ch?) 30 deg V-cut 0.9 mm 1.5 mm bad finish at lower part, PCB not planar enough, need hight-probing!
fabrication/electronics/fabrication_pcb.txt · Dernière modification: 2016/07/22 22:45 par magnustron