Lampa

A (dimmable) lamp machined from a solid piece of wood.

Liste de fournitures

• piece of wood (approx. 20x12x10cm^3)
• dimmer (Welleman K8064)
• bulb socket (E27 from conrad.ch)
• nice bulbs (PureLume Edison Vintage Lampe Big-Globe, alternative)

• The dimmer is quite audible, this is apparently known (see Velleman support forum)
• Milling wood with a column drill is quite annoying and results are somewhat limited by the operator ;)

Let's do a second version!? Using the Badog CNC as much as possible.

This time, start with a design (in FreeCAD):

<doodle |[lampa] Interested in joining this project>

</doodle>